Introduction
Xigmatek may not be everyone’s first thought when you ask them to name cooling manufacturer, but they’ve been around for many years, creating some incredible chassis products, CPU coolers and more. With that in mind, I’ve got high expectations of the LOKI II. Of course, this is only a budget friendly, and rather small CPU cooler, so it’s not about to break any world records. However, the budget end of the market is fiercely competitive and not everyone needs a super high-end custom loop water cooling system; actually, very few people do. What most people need is something that doesn’t suck as bad as the stock CPU cooler that came with their chip and more often than not, they don’t want to spend a lot of money.
As you can see, the LOKI II is quite a compact size cooler, so it may be suitable for a lot of SFF builds. It comes with three 6mm heat pipes, with a direct touch design and a 92mm PWM fan.
The packaging is simple enough, just a nice picture of the cooler, the specs on the other side and that’s about it really.
In the box, you’ll find the cooler, the fan, a universal backplate, fitting screws and washers, two fan retention clips and the Intel/AMD brackets.
The fan may be small, but it is still very nicely designed; it features orange fan blades, that look pretty funky and some sleeving on the cable.
The fan is a brushless fitting, with a 4-pin PWM connector.
The tower is tiny, but has a solid fin stack and a triple heat-pipe design which are U-shaped to pass through each side of the tower.
The sides are partially closed off, allowing airflow to be better directed through the fins and get heat away from the cooler.
The fan mounts on this side of the cooler and there’s a pair of grooves on the side to allow you to use the fan clips. The slim design of the cooler should also mean zero issues with ram modules.
A small Xigmatek logo on the top, looks pretty cool, but the cooler also shows some signs of being a little cheap here, but that’s not exactly a shock, because it’s priced cheap!
The heat pipes are direct contact and there’s a thick mounting block to help better dissipate the heat through those pipes.
