Noise and Ripple can easily be measured by an oscilloscope. These show how much voltage fluctuation there is on a particular rail. We tested the rail stability of the 3.3 volt, 5 volt and 12 volt rails using an identical time and millivolt scale for all graphs.
The latest ATX 12 volt version 2.3 specifications state that ripple from peak to peak must be no higher than 50 millivolts for the 3.3 volt and 5 volt rails, while the 12 volt rail is allowed up to 120 millivolts peak to peak to stay within specifications.
| Load (%) | 3.3V Ripple | 5V Ripple | 12V Ripple |
| 20 | |||
| 40 | |||
| 60 | |||
| 80 | |||
| 100 |
The Antec HCG 850W, like most Seasonic OEM units, has incredibly strong noise and ripple suppression. Across all rails it delivered a high level of performance and because all minor rails are provided by the 12 volt rail it is logical that the noise and ripple is similar across the 3.3, 5 and 12 volt rails.
Philips is well known for its monitors, but its Evnia series stands as the jewel…
Alongside AMD servers, MSI showcased its NVIDIA MGX AI servers and Intel Xeon 6 solutions…
Intel has its Gaudi 2 accelerators available, and Gaudi 3 will be available soon. But…
Intel has just dropped a brand new update for its Arc GPU graphics drivers, but…
The latest keyboard from Epomaker is here, with the Galaxy 100, a $110 fully customisable…
Corsair has just announced the LX-R RGB Series, a new line of reverse-flow cooling fans…
