Antec NeoECO 750W Modular 80 Plus Gold Power Supply Review

Cross-Loads

3.3V and 5V are tested at 10-100% loads together, and then 12V is tested in the same fashion. This shows us if the PSU is able to maintain its target voltage regulation while delivering different loads. Ideally, you want to see this within 5% deviance, but under 3% is better, and of course, the lower the better with 0.00% change being the ideal result.

Again, very constant results here, with the voltages staying well within a 1% target, and while the voltage drops on the 3.3v when it’s loaded, and climbs a little when the 12v is loaded, the deviance is very small and pretty much the expected result.