Arctic Cooling Accelero Twin Turbo Pro VGA Cooler Crossfire Review
Luke Hill / 13 years ago
InstallationArctic Cooling supply all of the RAM and voltage regulator heatsinks needed to keep the card’s components sufficiently cooled. They use a sticky thermal tape to stick onto each individual component which could be problematic after the first installation due to a poorer contact.
.jpg "SAM_1272 (Copy).jpg")
The cooler engulfs the majority of our Radeon HD 4870’s 10″ PCB. In our opinion it looks amazing when fitted onto a graphics card.
Be sure you have enough room inside your case as this bad boy takes up a whopping 3 PCI expansion slots.
The twins (pun intended) look brilliant when fitted inside our case. Even better, if your case has a side panel window you will be able to peek at them doing their job as you game. The humongous 6 expansion slots they dictate renders the majority of the rest of the motherboard’s expansion capabilities useless.
Thankfully, I can tell you that installation was fairly straightforward thanks in large to the excellent instruction sheet supplied. The process was aided by the fact that we installed the cooler onto a Radeon HD 4870 graphics card and the instruction sheet documented installation for a Radeon HD 4890 which is a very similar card. Nevertheless, you should have very little trouble installing this cooler on any graphics card.
