ASUS ROG LOKI 850W Platinum SFX PSU Review
Peter Donnell / 1 year ago
Transient Loads
These results measure the power supply from 0% load to 100% load on various rails to simulate a power spike from your system. Typically, we would like to see as small a spike as possible relative to the requested voltage. With modern GPUs being notorious for power spikes, this is becoming more relevant in modern PSU design.
The specifications for ATX 3.0 were released in February 2022. It includes the new 16-Pin 12vHPWR connector that can deliver up to 600 W to graphics cards. These incorporate data lines for components to negotiate power capabilities with the PSU so they do not draw more power than the PSU is capable of delivering. The specification also has more strict requirements for handling spikes, two times the nominal output for 100 microseconds.
Again, absolutely faultless performance, fast, clean and smooth transitions from all the rails. There was a tiny bump on the 12v, but it’s so small, it’s absolutely nothing of concern, so top marks here.
0-100% 3V
0-100% +5VSB
0-100% 12V
