We continue to update our testing methods around once per year. As such, we re-test older hardware to reflect changes over time. These can be driver updates, Windows updates, game patches, and more; all of which have an impact on performance figures. Furthermore, we update our test bench to newer and more relevant hardware. This means that our new reviews aren’t always comparable to those of older reviews, so please compare the testing methodology on older reviews should you be trying to compare them with newer ones.
When it comes to our benchmarks in our reviews, the benchmarks are pretty self-explanatory and kept as simple as possible, although there are a few exceptions. Remember that your choice of a graphics card, CPU, the silicon lottery, and other factors can yield different numbers, and there’s always a margin for error when using any software.
Links are provided below, as well as the settings we use. We encourage you to not just look at how one product compares to any other, but how it compares to your own. If you’re looking to build a new system, you should benchmark your current PC using the benchmarks available to you. You should then look at the percentage improvement from your current hardware to the hardware tested here to give you a ballpark figure of how much of an upgrade this will provide you with.
To gauge performance levels which are easily reproduced time after time, by both ourselves and our readers, we now stick strictly to games default profiles. We now use the “High” profiles for all games or their respective equivalent at all resolutions. V-Sync is always disabled in our testing, as are FreeSync and G-Sync technologies or similar. Graphics card power usage is set to optimised or balance, and the system power mode set to High Performance within Windows and the available GPU driver software. Identical settings are used for all resolutions unless otherwise stated.
Everyone has a reasonable noise level preference when it comes to components on a computer. Some can handle all fans at 100% load to keep temperatures down; some want an entirely silent computer. To accurately gauge the noise output of a graphics card, we position a Precision Gold N05CC one meter above our open-air test bench and take an average reading at idle and load.
We take power readings during the idle state with no background applications running. Then again at 50% completion of the Unigine Superposition benchmark, using the average as the final published result.
We take temperature readings after 10 minutes of desktop idle with no background programs running, then take the recorded maximum delivered from Unigine Superposition after a 4K optimised run, confirming the numbers are accurate with HWMonitor. Furthermore, the ambient temperature is always kept +/- 1c from 21c.
OFFICIALLY LICENSED Built with matching firmware to seamlessly work with all models of PS5 and…
Pixart 3327 optical sensor with native DPI of up to 6, 200 Comfortable symmetric design…
✽[NOTES] An Aqara Zigbee 3.0 Hub is required and sold separately. The Aqara Cube T1…
Flight cloche with 4 firing triggers Dual speaker Riser included 17" monitor Light-up marquee Was…
14 games in 1 Wi-Fi Monitor 17” LCD Light Up Marquee 3D Coindoor Was £549.99…
Game in the Fast Lane: Play with hyper-fast, sub-1ms SLIPSTREAM CORSAIR WIRELESS TECHNOLOGY, or connect…