The unique ability of the DisplayPort signal to be split into multiple streams is something that has been around for a while, namely since DisplayPort 1.1 compatible graphics cards have been on the market. AMD’s HD 5000 series were the first to offer multiple display outputs from a single DisplayPort but is very much limited by the low bandwidth of DP 1.1. In terms of DisplayPort innovations we haven’t really seen an MST hub from anyone up until now which has been quite sad.
Today we are looking something that isn’t exactly glamorous but fills quite a large hole in the market. Club3D’s MST (Multi Stream Transport) DisplayPort Hub is one of the first of those elusive MST hubs that allows you to split off a DisplayPort compatible graphics card output into any combination of resolutions that fills the maximum bandwidth of the link, the two links would be DisplayPort 1.1 or 1.2 aka HBR and HBR2. You can see full bandwidth details below:
Most people will choose to use a trio of 1080p displays as these are currently the most affordable solutions on the market. This MST hub from Club3D does support Eyefinity but Nvidia surround does not work due to a lack of driver support from Nvidia, if and when Nvidia fix it the MST Hub will support it.
The ability to split a DisplayPort output into up to three displays of varying resolutions will also come in useful for mobile workstations where you need more display real estate but simply can’t get that in a mobile solution or when your graphics card supports more displays than it has ports. The Club3D MST Hub does require an external power source but uses only around 2.5-3.5 Watts.
The biggest rival to Club3D is the Matrox TripleHead2Go DP Edition but costing around £275+ this is mainly limited to the professional and business markets – most other people have made-do with other more affordable compromises and solutions. Club3D’s MST Hub on the other hand costs only around £90-100 making it about a third of the cost of its biggest rival and unlike the Matrox product the Club3D MST supports a higher overall resolution and more bandwidth over DP 1.2. This is compared to the maximum of 5760 by 1080 supported on the Matrox. It is also worth noting that the Matrox unit processes “on-chip” and sends the signal to the three monitors so isn’t capable of gaming, high frame rates or ultra high definition video playback whereas the Club3D MST retrieves the processing from the GPU so supports everything that the GPU would support.
The Club3D MST Hub, pictured above, serves a very functional purpose for desktop systems. With the vast majority of graphics cards only having three to four display outputs, yet supporting 6 displays, the only way to achieve more displays than the number of ports is to use one of these MST hubs. We will be testing the Club3D MST hub’s capabilities in a triple display scenario through one port because unfortunately we do not have six displays or a second MST Hub.
Features
According to a new report, the GeForce RTX 5090 GPU will be very expensive. It…
A new AMD processor in the form of an engineering model has been leaked in…
SK Hynix has claimed to be the first company to mass-produce 321-layer NAND memory chips.…
SOUNDS GREAT – Full stereo sound (12W peak power) gives your setup a booming audio…
Special Edition Yoshi design Ergonomic controller shape with Nintendo Switch button layout Detachable 10ft (3m)…
Fluid Motion: These flight rudder pedals are smooth and accurate that enable precise control over…