Setting up the TN60W does involve a little bit of one-time configuration before the camera is placed out in the field. Before the camera can be configured, its needs to be directly connected via the included patch lead to a computer to set it up. Connecting it to a switch to start will result in a no-connection scenario, which may lead to user wondering if the camera is faulty or not. Rest assured though the camera does work when directly connected for setup.
The iWizard is a simple step-by-step set up program which gets each camera configured individually for use on the network. Once the IP configuration has been altered to enable the cameras to run on a network in its entirety, the iWizard will then be able to reconfigure any cameras that are plugged in and running.
OFFICIALLY LICENSED Built with matching firmware to seamlessly work with all models of PS5 and…
Pixart 3327 optical sensor with native DPI of up to 6, 200 Comfortable symmetric design…
✽[NOTES] An Aqara Zigbee 3.0 Hub is required and sold separately. The Aqara Cube T1…
Flight cloche with 4 firing triggers Dual speaker Riser included 17" monitor Light-up marquee Was…
14 games in 1 Wi-Fi Monitor 17” LCD Light Up Marquee 3D Coindoor Was £549.99…
Game in the Fast Lane: Play with hyper-fast, sub-1ms SLIPSTREAM CORSAIR WIRELESS TECHNOLOGY, or connect…