Featured

Cooler Master Masterair MA610P and MA410P Review

Test System and Methodology


Please note that our testing system was completely revised in September 2017. That means all previous results have been scrapped, and a new set of benchmarks introduced. For a look at our previous reviews, please consult our most recent review that used that system. Please note that we re-tested the Noctua NH-D15S as our base benchmark for cooling results.

Test system:

  • Gigabyte Aorus Gaming 9 Z270
  • Intel Core i7-7700K Delidded w/ NT-H1 under IHS
  • Gigabyte GTX 980 Ti
  • 32GB Crucial DDR4 2400 MHz
  • 512GB OCZ SSD
  • be quiet! Dark Power Pro 800W
  • Lian Li T80 Test Bench
  • All testing conducted using NT-H1 thermal paste

We’d like to say a big thank you to Gigabyte, Noctua, Crucial, Intel, OCZ, be quiet!, and Lian Li for providing us with the above testing equipment and their on-going support.

Testing Methodology

  • We always use Noctua Noctua NT-H1 thermal paste to make sure testing reveals the efficiency of the tested coolers not the efficiency of the bundled thermal paste
  • Prime 95 is run for 10 minutes to calculate “load” results
  • Unigine Superposition is run for 10 minutes to calculate “gaming” results
  • The average temperature across all cores is taken
  • Fans are left to operate at default PWM profile speeds unless otherwise stated
  • For water cooling tests, all pumps have been operated at 12 volts unless otherwise stated
  • Ambient temperatures should be between 21-23 degrees in all our tests unless otherwise stated
  • Acoustic measurements are taken 10cm horizontally and 10cm vertically away from the CPU cooler with the VGA fan disabled
  • Stock tests are performed using “out of the box” settings for the CPU
  • Overclocking tests are performed with the CPU set to 5 GHz and 1.345v
  • All coolers were tested under identical settings unless otherwise stated.
  • There is approximately a 1-degree Celsius margin of error in our temperature recording software CPUID HW Monitor
  • There is approximately a 1.5dBA margin of error with our Benetech GM1351 decibel meter
  • In all these graphs we may have a few “reference” results of particular products that do not fit within that category for comparative purposes.

Software Used

Page: 1 2 3 4 5 6

Peter Donnell

As a child in my 40's, I spend my day combining my love of music and movies with a life-long passion for gaming, from arcade classics and retro consoles to the latest high-end PC and console games. So it's no wonder I write about tech and test the latest hardware while I enjoy my hobbies!

Disqus Comments Loading...

Recent Posts

Treat Yourself to Some Last Minute PC Hardware Deals… Because, Why Not!

The holiday season is upon us, and that means one thing: deals for PC gamers,…

2 days ago

PC Requirements for Crimson Desert Revealed

Pearl Abyss's highly anticipated open-world action-adventure, Crimson Desert, is slated for release in late 2025…

2 days ago

New RTX 5070 Ti Rumored to Feature 16GB of GDDR7 Memory and 350W TBP

A new rumor surrounding the RTX 5070 Ti sheds light on its memory configuration and…

3 days ago

Black Myth: Wukong Update Adds PS5 Pro Support

Black Myth: Wukong's December update launched earlier today, introducing several new features, including support for…

4 days ago

Thermaltake 120mm TH120 V2 ARGB Sync All In One CPU Water Cooler

The TH V2 ARGB Sync AIO Liquid Cooler series is the next generation model of…

5 days ago

MSI Z890 GAMING PLUS WiFi DDR5 PCIe 5.0 ATX Motherboard

Unleash your gaming potential with the Z890 GAMING PLUS WIFI motherboard, the ultimate choice for…

5 days ago