Featured

Corsair Ironclaw Wireless Gaming Mouse Review

A Closer Look

Like Scooby and the gang pulling the mask of the bad guy, it turns out it was the original Ironclaw all along! Seriously though, this one does look extremely similar to the old model when it comes to ergonomics. It has the same “junk in the trunk” back end, as well as the wider side panel body design. However, the eagle-eyed fans will notice there’s quite a lot more buttons bolted onto this one than there used to be.

More is More

It still has the same overall design, sure. However, that’s no bad thing, with two large control surfaces for the LMB and RMB. Tucked into the middle is an aluminium weighted scroll wheel with soft rubber tread for added control too. However, off to the left (of the mouse, right of this picture), are two additional switches. These can be programmed using the iCUE software to be whatever you want. I use macros to set them to Copy and Paste, or as extra melee and reload buttons while gaming. Of course, what you do with them, is really down to your own imagination. Setting a macro that opens eTeknix.com is highly recommended, but I am a little biased.

Even More is Even More

If those extra buttons aren’t enough, you’ll find the usual two side buttons here. They’ve been enlarged a little this time around though, making them even easier to use with various grip types. What’s interesting though, is that Corsair has slipped in a third button on top of them. I’ve never quite seen this configuration before, but it feels more natural than you might think. Of course, you can use iCue to program any button. Personally, I like this for swapping between more more precise sniper mode with low DPI and my higher DPI assault setup for FPS gaming.

Ten Buttons!

It’s quite a complex setup having ten buttons, but Corsair has done well to not compromise the standard button layout at all. It still feels like a standard five button configuration, but the additional five are all within easy and natural reach. That many buttons does make this a fantastic mouse for any kind of work and gaming though, from MOBA, MMO, and even FPS.

Get a Grip

Everything is a little bit bigger with the Ironclaw though, which means it works best with a palm rest grip. It has hard-wearing textured side panels too, so you can really keep a firm hold on it; perfect for gaming then!

Don’t Get a Grip

It may grip your hand firmly, but it won’t grip your desk. Those slipmats are massive and mean it’ll glide with ease even on softer gaming surfaces. Plus, you’ll also find a small switch here for turning the mouse off when not in use. It can also toggle between 2.4 Ghz wireless, or Bluetooth modes.

Page: 1 2 3 4 5

Andy Ruffell

Disqus Comments Loading...

Recent Posts

Seagate Game Drive for PS4/PS5

OFFICIALLY LICENSED Built with matching firmware to seamlessly work with all models of PS5 and…

16 hours ago

HyperX Pulsefire Core

Pixart 3327 optical sensor with native DPI of up to 6, 200 Comfortable symmetric design…

16 hours ago

Aqara Cube T1 Pro

✽[NOTES] An Aqara Zigbee 3.0 Hub is required and sold separately. The Aqara Cube T1…

16 hours ago

Arcade1Up STAR WARS ARCADE MACHINE

Flight cloche with 4 firing triggers Dual speaker Riser included 17" monitor Light-up marquee Was…

16 hours ago

Arcade1Up MORTAL KOMBAT LEGACY 14 GAMES

14 games in 1 Wi-Fi Monitor 17” LCD Light Up Marquee 3D Coindoor Was £549.99…

17 hours ago

CORSAIR KATAR PRO WIRELESS Ultra-Light FPS Gaming Mouse

Game in the Fast Lane: Play with hyper-fast, sub-1ms SLIPSTREAM CORSAIR WIRELESS TECHNOLOGY, or connect…

17 hours ago