Performance: Gigabit Ethernet
Fixed Block Size
To test the maximum throughput a connection can handle, a fixed block size of 16384 Bytes is sent from the client to the server over a period of five minutes. The higher block size will allow the transfer rate to stay as high as possible which is a scenario that you know from file copies. A single large file is a lot quicker to move than lots of small files with the same total size.
Variable Packet Size
In a real-world situation, the blocks of data that pass through a network adaptor are not of the same size each time, so to give a more realistic impression of how an adaptor performs, the adaptor is once again tested for five minutes. This time, however, the block size will vary from 32 Bytes up to 16384 Bytes in increasing steps of 148.7 Bytes each time.
TCP Performance
UDP Performance
Bought a D-link DIR-882 along with a 3TB Nas drive in an external case to use for network storage on a home network. Would not work and told by D-link that the router will not support drives over 1 TB. Was later told that a 3 TB SHOULD work and that my drive must not be compatible. Nowhere in ANY d-link documentation is the 1 TB limit identified or any mention of compatibility issues. D-link does NOT publish a list of products that have been tested. Had such documentation existed, I would have purchased a different router or drive. There attitude is “too bad”. Will NEVER recommend or purchase D-link products again.