Deepcool MACUBE110 PC Case Review

Complete System

Fitting a test system in here was as easy as can be really. It’s a small case, but not so small that it’s a pain to work with. The PSU shroud takes the PSU and bulky storage devices and hides them completely out of sight.

There’s a range of cable routing holes here, above, to the side, and even below the motherboard, allowing for very short and clean cable runs.

Graphics card length clearly isn’t an issue, and even some of today’s flagships should give you cause for concern. Plus, the addition of the GPU support arm is certainly welcome to prevent longer and heavier cards from sagging.

There’s excellent clearance in the front too, with plenty of room to fit a good size radiator of fan configuration.

Plus, there’s great clearance above the motherboard too, allowing for more fans or a slim radiator in the top.

There’s a pre-installed 120mm fan as the exhaust in the rear. Of course, this can be height adjusted easily enough, which is handy if you’re mounting a small radiator here and need to prevent a hardware conflict with your motherboard.

With all the panels back place, the MACUBE110 looks ultra-stylish and clean. IO really like that tempered glass window design. It sits flush into the frame with just the handle adding to the width of the case. Sure, it doesn’t have a load (or any) RGB as standard, but honestly… I think that’s what I like the most. Plus, you could add all the rainbow lighting you desire yourself.

How Much Does it Cost?

Amazingly, this wonderful piece of PC case doesn’t cost much at all! It’s priced at just £55, albeit, the stock is a little thin on the ground right now. You can check for up to date prices and stock information on Amazon, and you have a choice of the black version here or the white version here; both are the same price.