Dishonored 2 has received widespread critical acclaim and some argue it’s a contender for game of the year. Unfortunately, the PC version isn’t great and suffers from poor optimisation. Thankfully, the developer acknowledged this and promised to fix all the performance issues in a timely manner. Recently, the update 1.2 beta went live and includes a mammoth number of fixes as well as visual enhancements. Here we can see the changelog in its entirety:
Dishonored 2 Update v 1.2 Overview
General performance and optimisation improvements
Auto-detection of the Visual settings was re-worked based on player feedback and observed issues. If still experiencing issues after updating drivers and downloading patch 1.2, advise using the “Restore Settings” option to apply the recommended settings for your hardware.
Max pre-rendered frames is now managed by the game, advise removing any previous manual customizations in graphics driver control panel
Fixes multiple related to game logic
Fixed various issues related to user interface
Fixed various issues related to mouse/KB and gamepad, including:
—- Mouse smoothing is now set to minimum by default
Fixed various issues related to using alt-tab related bugs
Fixed various issues related to multiple monitors
—- Fixed a bug where Resolution Scaling was deactivated when the game ran above 30 FPS
—- Changed the Resolution Scaling settings to be more clear
Added new settings in the Options menu:
—- Added a Framerate Limiter so the player can limit framerate fluctuation when playing without V-sync
—- Added TAA Sharpness option
—- Added more options to V-Sync settings
—- —– If you had previously disabled V-sync, please check your FPS limiter setting to ensure it is set to your desired limit.
—- Added Triple Buffering option
PERFORMANCE
Reduced framerate stuttering
Added a customizable FPS limiter to reduce the fluctuation
Framerate capped at 120 FPS to prevent physics issues which occur only above 120fps
Max pre-rendered frame is now managed by the game
Adjusted Texture Details settings so settings make a significant visual and performance change
Fixed a bug where AMD GPU experienced huge framerate drops when there is cloth simulation in the environment.
Adjusted ocean settings for perf improvement
Added frequency in V-sync UI
Fixed a bug where VRAM usage was higher than available VRAM
Fixed a bug where auto-detected settings were set too high for certain hardware
Added HBAO+ support for AMD GPUs
Fixed a bug where turning HBAO+ ON created some bad shadowing on player’s hands
Removed Environment Details settings as it was strongly tied to View Distance
Removed Fog Quality settings as it was not impacting the visuals or providing performance advantages
Adjusted auto detected settings for R9 290X2
Fixed a bug where Water Quality settings was only impacting ocean, not canals or pools
Improved CPU cores utilization on high and low-end machines
MOUSE, GAMEPAD, & CONTROLS
Fixed a bug where mouse sensitivity was framerate dependent
Fixed a bug where the controller vibrates continuously it the player switched from gamepad to mouse and keys while the gamepad was vibrating
Fixed a bug where Aim Friction didn’t work with a gamepad
Fixed a bug where the gamepad could not be recognized if plugged after the game was ran
Fixed a bug where resolution could not be changed with mouse
Mouse smoothing setting is now set to minimum by default (setting won’t get overwritten if customized by the player)
ALT+TAB
Fixed a bug where using ALT + TAB could result in endless switch between the game and other programs
The player can no longer bring up the Pause menu when using ALT + TAB while dying
Fixed a bug where the bug kept on registering mouse movements while in background after the player used ALT + TAB to switch to another program
CRASH FIXES
Fixed a bug where the game could crash if the player decided to leave the Clockwork Mansion while Clockwork Soldiers were beheaded
Fixed a bug where the game crashes if the player attempted to go into visual settings menu after disconnecting a monitor in game
Fixed a crash when selecting a video card without attached monitor to it
Fixed a bug where game could freeze in “Another Strange Visit” when opening the weapon wheel with Middle Click button and then scrolled if the player used gamepad before
MENU & OPTIONS
Fixed a bug where the collar of the player was visible while using Shadow Walk assassination in large FOV
Fixed a bug where the game could stretch the resolution to fit screen while using a non-native resolution and switching from Borderless Windowed Mode to Windowed Mode
Fixed a bug where the menu was not filling the whole screen in some resolutions
Fixed a bug where Mouse Smoothing setting was sometimes not properly displayed even though it was properly saved
Fixed a bug where ‘Unassigned’ text for unassigned buttons overlaps nearby text with Keyboard and Mouse controls
Fixed a bug where the player was unable to switch to Full Screen or Windowed Mode after he switched to Borderless Windowed Mode
Added a Framerate Limiter so the player can limit framerate fluctuation when playing without V-sync
Added TXAA sharpness setting
Changed the Aim Assist settings to be more clear
Added Triple Buffering option
Added more choices to V-Sync settings
Monitor/Resolution
Fixed a bug where restoring default settings activated the second monitor as the default monitor
Fixed a bug where the game switched to Borderless Windowed when the player changed resolution while in windowed mode
Fixed a bug where the game was displaying a black screen if the resolution was set to 1786 x 992 in full screen
Fixed a bug where expiration of change monitor confirmation dialogue while game is minimized can cause display to stop functioning
Fixed a bug where Resolution Scaling was deactivated when the game ran above 30 FPS
Changed the Resolution Scaling settings for a better understanding
Added resolution ratio to the Resolution drop list
Fixed a bug where resolution scaling setting was not saved when quitting the options menu
Fixed a bug where the current game resolution was applied to the monitor when switching monitor even if this resolution was not supported
UI
Fixed a bug where mouse Wheel pop up will highlight as selected incorrect slot after holding key corresponding to an empty slot
Fixed a bug where initiating Black Market shop with keyboard displays gamepad prompts on menu until additional keyboard or mouse input
Blink, Far reach and The Heart are now automatically binded to shortcuts after being acquired
Fixed a bug where the Gun shortcut was not automatically assigned if bullets were picked up before the gun
Fixed a bug where “<” key appeared as “Unassigned” in game when bound to any action
MISC
Fixed a bug where sabotaging the Oraculum device would count as 2 kills and prevent getting the “Clean Hands” achievement
Update 1.2 known issues:
Incorrect labels in the Options menu:
—- “Windowed Mode” should be “Display Mode”
—- “Adaptive Resolution FPS Threshold ” should be “Adaptive Resolution FPS Target ”
—- “Borderless windowed mode ” should be “Borderless Fullscreen ”
—- “Field of Vision” should be “Field of View ”
—- “God Rays” should be “Light Shafts ”
—- Adaptive Resolution FPS Threshold setting is not accurately reflected in the Visuals menu after restarting the game when FPS Limiter is used.
—- Adaptive Resolution FPS Threshold becomes locked to the previous FPS Limiter setting when V-sync is enabled.
—- Workaround: Toggle V-sync off, then change the FPS Limiter to the desired setting before re-enabling V-sync.
A visual distortion may occur at the bottom of the screen when toggling Triple Buffering while in-game.
—- Workaround: Toggle Triple Buffering at the Main Menu, or turn it off then back on while in-game to remove the distortion.
The in-game Framerate may remain locked to 60 FPS when the V-sync setting is set to Full on a monitor that supports higher than 60Hz refresh rates.
—- Workaround: Disable V-sync and manually set the FPS Limiter setting to higher than 60 to achieve Framerates above 60 FPS.
The FPS Limiter setting only displays text in English and is not localized.
—- Workaround: None. Localization is expected to be implemented in a future update.
The Adaptive Resolution setting will change to display as Manual when exiting and re-entering the Visual settings menu after setting it to Always.
—- Workaround: None. This is a visual issue with the menu. The Adaptive Resolution setting will still be enabled and set to the default for the Always setting.
Keyboard and Mouse controls may display latency in menus and during gameplay when V-sync is set to Half.
—- Workaround: Either Disable V-sync or change the setting to Full.
Framerate may not be accurately locked to 30 FPS when setting V-sync to Half
—- Workaround: Disable V-sync and change the FPS Limiter setting, or increase the V-sync setting.
Multiple confirmation prompts may appear when cancelling a change to the Triple Buffering Setting.
—- Workaround: None. Cancel the prompt again until it no longer appears.
Framerate may be decreased when using V-sync without Triple Buffering Enabled
—- Workaround: Enable Triple Buffering to see if that increases performance, or disable V-sync.
Controls may become locked if a controller has been disconnected while the game is running
—- Workaround: Use Alt+Tab to leave the game window then return, or reconnect the controller.
Setting the Adaptive Resolution to Off changes the Adaptive Resolution FPS Threshold to 29.
—- Workaround: None. This is a visual issue with the menu and does not affect the actual in-game Framerate.
Have you been experiencing any issues with Dishonored 2 on the PC?
Plaion, a leading video game publisher, and Retro Games Ltd., a specialist in reimagined classic…
During the latest earnings call, NVIDIA CFO Colette Kress warned of a potential GPU supply…
Chinese sources say the GeForce RTX 5090, RTX 5080, RTX 5070 Ti, and RTX 5070…
GTA 6 doesn’t have an official release date yet, but it has already earned a…
Stay on Point with ActiveTrack 6.0 - With upgraded tracking tech, OM 6 sticks to…
Pack includes three Wiser Radiator Thermostats. These smart radiator thermostats are only designed to work…