EK Water Blocks is releasing a 140mm D-RGB version of its EK-Vardar fan – the EK-Vardar EVO 140ER D-RGB. Besides the new and advanced addressable lighting, the new fan also incorporates the Extended Range (ER) of the PWM operation feature. As well as the special Start-Stop function which brings a true 0 dB experience for the absolutely silent operation.
The EK-Vardar RGB is a high-static pressure computer cooling fan, designed and built primarily for high-performance liquid cooling systems. The Vardar family of cooling fans carries the notorious name of a type of the cold northwesterly wind blowing from the mountains down to the valleys of Macedonia. They feature a black square frame that does not allow for the air to escape and ensuring optimal airflow through the radiator.
The fan uses a dual ball bearing most commonly used in industrial fan applications. The operational range is from 400rpm, all the way to 1600rpm. This extended range allows for a wide range of scenarios and covering the requirement of either silence or high performance in a single fan. Aside from the low-rpm operation, the fan features a Start-Stop function that will ensure the user a true 0 dB noise environment. When a fan curve is set with the minimum threshold point below 25-30% PWM duty cycle (depending on the motherboard model), the motor and the electronics will turn off and the fan will simply stop spinning. EK-Vardar EVO 140ER D-RGB restarts operation automatically as fan control ramps up its operational duty cycle past threshold start-stop point.
The transparent, but frosted 7 fan blade design is optimized for light dispersion and high-pressure operation while maintaining the low noise profile throughout the whole operation range of the fan. Under the motor hub, there are a total of 9 addressable LEDs ensuring 360-degree light diffusion at broad daylight as well. The diodes can be separately controlled allowing unique lighting effects.
One of the key features of the EK-Vardar RGB fans is its simplicity as it uses standard 3-pin 5 V D-RGB connectivity. Meaning it can be used with any standard 3-pin 5 V D-RGB controller or any of popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB/Addressable header.
The EK-Vardar EVO 140ER D-RGB fan is designed and engineered in Slovenia by EK Water Blocks and is already available for purchase through EK Webshop and Partner Reseller Network. In the table below you can see manufacturer suggested retail price (MSRP) with VAT included. EK-Vardar EVO 140ER D-RGB (400-1600 rpm): 25.90€. For more information, visit the product page.
According to a new report, the GeForce RTX 5090 GPU will be very expensive. It…
A new AMD processor in the form of an engineering model has been leaked in…
SK Hynix has claimed to be the first company to mass-produce 321-layer NAND memory chips.…
SOUNDS GREAT – Full stereo sound (12W peak power) gives your setup a booming audio…
Special Edition Yoshi design Ergonomic controller shape with Nintendo Switch button layout Detachable 10ft (3m)…
Fluid Motion: These flight rudder pedals are smooth and accurate that enable precise control over…