EK Water Blocks, the European premium liquid cooling gear manufacturer, is releasing a series of unique flow indicators that belong to the Quantum Line. These Quantum flow indicators visually represent the coolant flow rate, which is often hard to see with the naked eye. This can be very useful to instantly see if your loop operation is nominal or there’s trouble with the pump or flow in some other area as well as looking cool! It also features addressable RGB illumination where the LEDs are covered by a stylish black anodized aluminum cover to hide the hotspots. Aside from the standalone option, there are two more that mount directly on the EK-Quantum Vector GPU water block.
This standalone flow indicator features three G1/4″ ports, all of which are female. It can be mounted mid tube run with two fittings or fastened to any G1/4″ port on a radiator, pump, or even a block via the use of a dual male-threaded extender. Any of the threads can be used as either inlet or outlet. It can be used in a straight flow-through setup, or it can replace a 90° angled fitting, or a 90° bend in your loop.
These GPU-mounted flow indicators are made to replace the stock terminal with the one integrating the flow indicator. They come in two variants, with either top-bottom flow or bottom-top flow pattern. Flow patterns are mandatory to be followed for proper operation of the indicators
All EK-Quantum flow indicators are manufactured out of CNC machined cast acrylic material with an anodized aluminium cover that has the same finish as EK-Quantum Vector GPU backplates for a seamless aesthetic blend. The aluminium cover is used to also cover any LED hotspots, as proper LED implementation is one of EK’s key missions when designing a product. The flow indicator features a unique impeller body with a closed center and sloped impeller wings which prevent air from being stuck inside the indicator.
These products are compatible with popular RGB sync technologies from all major motherboard manufacturers as well as EK-Loop Connect. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB (aRGB) header.
The EK-Quantum Flow Indicators are available for order through the EK Webshop and dedicated reseller network. In the table below, you can see the manufacturer suggested retail price (MSRP).
If you do, therefore, want to learn more about them, you can check out the official EK Water Blocks website via the link here!
What do you think? – Let us know in the comments!
According to a new report, the GeForce RTX 5090 GPU will be very expensive. It…
A new AMD processor in the form of an engineering model has been leaked in…
SK Hynix has claimed to be the first company to mass-produce 321-layer NAND memory chips.…
SOUNDS GREAT – Full stereo sound (12W peak power) gives your setup a booming audio…
Special Edition Yoshi design Ergonomic controller shape with Nintendo Switch button layout Detachable 10ft (3m)…
Fluid Motion: These flight rudder pedals are smooth and accurate that enable precise control over…