After the long reign of the most popular water block on the market, the EK-Quantum Velocity, it’s time to push the boundaries yet again and step into the future. Enter the next generation EKWB Quantum Line water block – the EKWB Quantum Velocity². The water block showcases the EK-Matrix7 initiative, a standard where increments of 7mm manage the height of products and the distance between ports. This product uses a socket-specific cooling engine to ensure the best performance and optimal flow with low restrictions on every platform.
Three years after the original Velocity water block launch, EKWB is officially launching the Velocity² 1700, which is engineered for the Intel LGA 1700 socket and Alder Lake series desktop processors. Other Velocity² CPU water blocks will also follow shortly, tuned specifically for each CPU socket and IHS geometry on the market.
This new water block kept the name “Velocity” because it retained the ability to be responsive and agile in the world of liquid cooling. Embedded in the Velocity² is a next-generation EK CPU water block cooling engine that is socket-specific. A combination of mounting pressure and cold plate geometry, tailored for the IHS and die layout of Intel LGA 1700 socket processors, is used to achieve low hydraulic flow restriction and high performance. Thе lathe-turned cold plate is made with precision to cover the IHS effectively and put optimal pressure on the die area.
EK-Quantum Velocity² was redesigned inside and out. A new, patent-pending EK-Exact Mount mounting system was developed in the search for an easy-to-use but aesthetically pleasing mounting mechanism. It’s made up of only three pieces – the backplate, mounting screws, and the water block itself. It’s screwed in from the back, allowing for a seamless and clean front aesthetic without any screws disrupting the harmony of shape. The system uses pre-tensioned springs concealed in the water block top, so with just a few turns of the thumb-nuts, the installation is finished, and you get the exact mounting pressure needed.
The LGA 1700 version made for Alder Lake CPUs comes in 5 variants:
These variations are based on aesthetics and have almost no impact on performance. The cold plate is manufactured out of the highest-grade 99.99% pure electrolytic copper, machined with precision for the best possible contact and heat transfer which is further nickel-plated, except with the Copper + Acetal version which uses a bare copper cold plate.
The new EK-Quantum Velocity² series CPU water blocks are socket-specific, compatible only with Intel LGA 1700 socket and Alder Lake CPUs.
The EK-Quantum Velocity² series water blocks are made in Slovenia, Europe, and are available for pre-order through the EK Webshop and Partner Reseller Network. Nickel + Plexi model is expected to start shipping in mid-November 2021, with the other models following later that month. In the table below you can see the manufacturer suggested retail price (MSRP) with VAT included.
Alternatively, you can check out the EKWB website via the link here!
What do you think? – Let us know in the comments!
According to a new report, the GeForce RTX 5090 GPU will be very expensive. It…
A new AMD processor in the form of an engineering model has been leaked in…
SK Hynix has claimed to be the first company to mass-produce 321-layer NAND memory chips.…
SOUNDS GREAT – Full stereo sound (12W peak power) gives your setup a booming audio…
Special Edition Yoshi design Ergonomic controller shape with Nintendo Switch button layout Detachable 10ft (3m)…
Fluid Motion: These flight rudder pedals are smooth and accurate that enable precise control over…