News

EKWB Unveil its New Custom Loop Cleaning and Prepping Solutions

EK Water Blocks (EKWB) has announced the upcoming release of new loop cleaning and prepping solutions compatible with EK-CryoFuel coolants and all EK tubing types. The goal is to enable EKWB customers to extend their coolants’ life and avoid contamination breakdowns by using safe and compatible chemicals. An added benefit for the customers is they can now get everything in the EK shop, avoiding additional transport costs.

EKWB Loop Cleaning and Prepping Solutions

The purpose of the EK-Cryofuel Loop Cleaner is to clean your existing loop before pouring in new coolant or to prepare a new or unused custom loop fully. It removes any manufacturing residues, impurities, and coolant stains. This is not a stand-alone product as it requires a subsequent use of the Superflush solution to pick up any residue from the cleaner and ensure maximum stability of your new coolant.

EK-Cryofuel Loop Cleaner comes as a concentrate in a 250 ml bottle and should be mixed with 1250 ml (1:5 ratio) of distilled water before use. It is poured into the water-cooling system and left to circulate from 2 to 24 hours.

EK-CryoFuel Superflush
EK-CryoFuel Superflush is a solution made for rinsing the EK-CryoFuel Loop Cleaner residue from your loop. Once you’re done with your cleaning session using the EK-CryoFuel Loop Cleaner, you should circulate the Superflush solution for 15 minutes and drain it from your loop. Once your loop is cleaned out, another batch of Superflush should be used in the system. This time it should circulate for 24 hours before using the new coolant in your loop. If the Superflush foams too much, the pump speed should be reduced.

EK-CryoFuel Superflush comes as either a concentrate in a 250 ml bottle or a premix in a 1000 ml bottle. The concentrate option is to be mixed with approximately 2750 ml of distilled water (1:11 ratio). The premix option is ready for use out of the bottle. Superflush can be used as a stand-alone product to prepare a new loop for the coolant and extend its life, improve stability, and reduce soft tube yellowing.

EK-CryoFuel Loop Cleaner + Superflush (Concentrate 250 mL)
This is a combo of the two above-mentioned products and is a perfect way to set up your custom loop water cooling system for a new coolant. EK-CryoFuel Cleaner is used first to clean out the dirt, and the remainder of the previous coolant, followed by the Superflush to make sure no chemicals from the cleaner remain in the loop.

Price & Availability

EKWB has confirmed that both the EK-CryoFuel Loop Cleaner and EK-CryoFuel Superflush are readily available for pre-order through the EK Webshop and Partner Reseller Network with consumers looking at the following prices: