Enermax Liqtech 120mm & 240mm AIO Water Cooler Review

Installation

Installing either of the Enermax Liqtech coolers couldn’t be easier, the back plate is compatible with all major socket types, so it’s just a case of lining it up and dropping the four long screws through the motherboard.

Four plastic spacers hold the screws in place.

Then it is simple a case of putting on your thermal paste, putting the pump over the four screws we just put through the motherboard and screwing down the four thumb screws. The whole process takes less than five minutes, beyond that you just have to screw the radiator to your chassis, total installation time shouldn’t take more than ten minutes.

Installing the fans was easy enough, as you can see, the 120mm uses two included fans for a push-pull configuration.

The 240mm radiator features two fans, so you’ve a choice of either push or pull configuration, but you can always add another two fans for increased airflow.