Gigabyte’s motherboard series based on the Intel C612 chipset is quite an impressive one and I’ve already had the pleasure to test the MU70-SU0 server motherboard. Today I’m taking a look at its bigger brother, the dual socket Gigabyte MW70-3S0 workstation motherboard.
The Gigabyte MW70-3S0 workstation motherboard is based around Intel’s C612 chipset and offers you two LGA 2011-3 sockets with support for Intel’s Xeon E5-2600 V3 processors as well as 16 DDR4 modules for a total of up to 768GB RAM. The MW70-3S0 is a workstation board and as such it offers some other features than server boards, such as Multi-GPU configuration. With support for up to three graphics cards in CrossfireX or SLI via the three PCIe 3.0 x16 slots and coupled with the CPU and memory support will make sure that we don’t run out of performance anytime soon.
One of the really great things about this board’s memory support is that it supports the full speed of 2133MHz, even when all 12 memory banks are populated. In the past, you had to make the choice, whether you wanted capacity or speed. Gigabyte made sure that you’ll have a maximum speed on all memory banks at all times.
We also get plenty of storage abilities on Gigabyte’s MW70-3S0. Not only does it provide 10 SATA3 ports via the Intel C612 chipset where two of them support SATA DOMs, we also get an LSI SAS 3008 onboard controller with two Mini-SAS ports for eight SAS 12GB/s drives. The SATA ports support RAID 0/1/5/10 while the SAS ports support RAID 0/1/1E/10. The connectivity is secured by two Intel i210 Gigabit Ethernet ports that allow for easy trunking and link aggregation.
Overall, this board is built with quality components that should make sure that everything runs stable and for a long time. It is equipped with IR Digital PWM and IR PowIRstage IC controllers to guarantee a stable operating environment and OS-CON capacitors with a minimum service life of 50.000 hours. The installed chokes are high-end ferrite core chokes that again should help deliver a stable power to both CPU and memory.
Specifications
The specifications are taken directly from the manufacturers homepage and are as such subject to change in possible future revisions.
Key Features
Packaging and Accessories
The box follows a very simple design and is perfect for the market it’s aimed at. There is no need for fancy artwork like we’re used to on consumer motherboards.
The rear of the box gives a little detail about 3 key points that are important to a board of this caliber including reliability, availability, and serviceability. These are all major factors for any IT admin needing a reliable product with quality components that is easy to set up and maintain.
Inside the box, we find anything we need to get started, but nothing unnecessary that would drive up the overall price on the product. We get two SATA3 cables where one of them has an angled connector at one end, two CrossFireX bridges, as well as two NVIDIA SLI bridges for 2-way and 3-way SLI and CrossFireX support. There’s also the obligatory IO shield and a driver disk
According to a new report, the GeForce RTX 5090 GPU will be very expensive. It…
A new AMD processor in the form of an engineering model has been leaked in…
SK Hynix has claimed to be the first company to mass-produce 321-layer NAND memory chips.…
SOUNDS GREAT – Full stereo sound (12W peak power) gives your setup a booming audio…
Special Edition Yoshi design Ergonomic controller shape with Nintendo Switch button layout Detachable 10ft (3m)…
Fluid Motion: These flight rudder pedals are smooth and accurate that enable precise control over…