To test this board, we are able to run all of our tests at stock speeds using a pre-defined setup of hardware. We will also be overclocking the processor to 4.6GHz to see how the board compares against the stock speed. Also in terms of overclocking, we will be looking to see how far we can push the processor.
Test system:
- Gigabyte Z77-D3H
- Intel Core i7 3770k
- Corsair Vengeance 1866MHz 16GB
- AMD Radeon HD 7970
- Corsair H80
- Corsair HX1050
- Kingston HyperX 240GB SSD
- Lian Li T60
- 3 x AOC E2795VH
We would like to thank AOC, Asus, Corsair, Kingston and Lian Li for supplying us with our test system components.
Many different software applications are also used to gain the broadest spectrum of results, which allows for the fairest testing possible.
Software used:
- 3DMark 11
- AIDA64
- Cinebench R11.5
- CPU-Z
- Metro 2033
- PCMark 7
- Super PI
Is CPU-Z soooo buggy?
On page six CPU-Z shows “Core Voltage 1.068 V” while below You wrote 1.38 Volts. 😉
When we reviewed and tested CPU-Z was not fully supported then by the CPU and we had an evaluation sample as well.
where i can find this cd driver pack to download??? thnks… very needed 🙁