ID-Cooling Frostflow 240L AIO Water Cooler Review

Installation

The installation of the 240L does take a little longer than some coolers, but it’s certainly not difficult to do.

The universal back plate is easy enough to use, just put the four screws through to socket appropriate holes.

Two more screws to mount the Intel or AMD brackets to the pump.

Pop the mounting plate on the back of the motherboard.

Four thumb screws and four washers will then holt the backplate in place.

Then simply apply thermal paste, and use the four included thumbscrews to mount the pump onto the motherboard.

Once powered up, the pump has a cool slow spinning red LED effect that travels around the pump.