Kolink Unity Meshbay Performance Midi Tower Case

James Cusworth / 2 months ago

Balance style and airflow with the Kolink Unity Meshbay Performance PC Case. This ATX chassis has ample support for premium hardware, including NVIDIA RTX 40 Series GPUs and ATX motherboards. With three pre-installed PWM fans and plenty of mesh panelling, this PC case has outstanding out of the box cooling performance.
The Kolink Unity Meshbay Series cuts a fine figure on your desk. With a sleek, all-black chassis and mesh panelling, these PC cases balance style and cooling performance. There are two models available in the line-up, Performance and ARGB. This is the Performance Edition, with mesh front and side panels, and three pre-installed Kolink PWM 120mm fans. The Performance Edition provides phenomenal airflow and a more subtle aesthetic.
On top of its stylish good looks, the Kolink Unity Meshbay Performance has comprehensive support for all your gaming hardware. The backplate can hold up to ATX motherboards, and there are seven expansion slots with two additional vertical ones. Thanks to this, you can mount your GPU vertically (kit sold separately), and there is even 400mm clearance for extensive compatibility with the current market.
To keep the interior looking clean, there is a half PSU shroud capable of holding ATX power supplies between 150mm and 180mm. For storage, there are four drive bays at your disposal, featuring two for 2.5” SSDs and two for 3.5” HDDs.
Between the mesh panels and pre-installed fans, the Kolink Unity Meshbay Performance PC Case facilitates incredible natural airflow. Alternatively, you can take full advantage of the support for water-cooling components to craft a highly efficient thermal solution.
The pre-installed 120mm fans are mounted to the front and rear panels, in clusters of two and one, respectively. Naturally, these panels can support additional fans or radiators. Both the top and front panel can host up to three 120mm/140mm fans, or radiators up to 360mm long. Upon the rear, there is a 120mm mount that can be used for either a fan or radiator. The PSU shroud supports three 120mm fans, but a radiator cannot be installed here. Instead, a 240mm radiator can be mounted on the side next to the motherboard backplate.