Lamptron CW611 Watercooling Fan Controller Review
Ryan Martin / 12 years ago
For those who are interested, this page is just looking at the cables. These are the ends of the temperature sensors and they are the 2 pins that plug into the CW611 PCB. From my rough calculations all temperature sensors cables are the same length and are about 70cm long.
At the end of these is obviously the temperature sensors. You place these at certain points in your case and it will monitor the temperature. You can use these to set thermal targets for certain parts of your case and create thermal profiles to help reach those targets or use temperatures as thresholds for certain fan speeds.
The provided molex cable is fully sleeved and is about 22cm long.
The provided 3 pin extension cables are required to connect all your fans or pumps to the CW611. These are about 50cm long. The connections are open ended so you can connect 3 and 4 pin cables.
These are the ends of the cables that connect into the CW611 3 pin ports. As you can see even though the sleeving is generally good, it is not perfect and some of the cables do have coloured wiring exposed near the connector. You can fix this by pushing the sleeving back across it.
