Lian Li PC-011 Dual-Chamber Chassis Now Available

Peter Donnell / 8 years ago

o11-01-07 The latest dual-chamber chassis from Lian-Li is here at last! The PC-011 is every bit the premium chassis we would expect from a brand like Lian Li, and packs in support for (up to) an E-ATX motherboard, ATX PSU, room for 430mm long expansion cards, a solid amount of storage drives, multiple radiators and more. For those eager to show off their new hardware, you’ll be happy to see the chassis is crafted from gorgeous brushed aluminium and tempered glass on the front and left side panel, giving you a stunning view of the system interior.

It takes its design from its little brother, the PC-010, but as they say, bigger is better, and that’s where the PC-011 comes into play!

Key features of the PC-O11

Dual-compartment design: half glass, half aluminum
Width: 277mm; Height: 506mm; Depth: 457mm
E-ATX, ATX, MicroATX motherboards
ATX PSUs
Eight Expansion slots; 430mm VGA cards
CPU cooler: 150mm tall
4×3.5” HDD + 4×2.5” SSD; eight total drives
2xUSB 3.0, 1xUSB 3.1 type C, HD Audio on front panel
Fits multiple radiators 320mm x 70mm x 120mm

Unbridled Cooling for Hardcore Enthusiasts

The PC-O11 has up to three 360mm water cooling radiator mounts – users can choose to install three 120mm fans or a 360mm radiator on both the top and bottom panels in the main glass chamber. The PC-O11 also includes a removable bracket to prominently mount three 120mm fans or an additional 360mm radiator behind the front glass panel. Users can mount two thick 360mm radiators and a single 240mm radiator without needing to mod the case.

o11-01-05

A Showcase for Titanic, High-Performance Builds

The PC-O11 mounts E-ATX and smaller motherboards, with space for VGA cards as long as 430mm on its eight expansion slots. Its main glass chamber accommodates CPU coolers up to 150mm in height. The rear chamber hides ATX PSUs as long as 430mm and two removable drive cages fitting up to four 3.5” and two 2.5” drives or six total 2.5” drives. Users can also opt to mount 2.5” drives more prominently on the many fan mounts throughout the case – five 80mm mounts on the rear panel, two in the glass chamber and three in the PSU chamber, as well as any of the six 120mm mounts on the top and bottom panels.

Optional Accessories, Extras, and Inputs

Similar to the PC-O10, users can purchase an optional accessory to mount two VGA cards vertically using riser cables. The kit replaces the included expansion slot covers and includes a single riser cable. The PC-O11 also includes a removable plate for mounting most water cooling pumps and reservoirs. The front panel includes two USB 3.0 and HD audio ports. An additional accessory also adds a USB 3.1 type C port to the front inputs. The top and bottom panels include removable mesh dust filters covering the primary fan mounts. The drive cages and PSU mount include rubber vibration dampeners to minimize idle noise.

o11-01-00