These results measure the power supply from 0% load to 100% load on various rails to simulate a power spike from your system. Typically, we would like to see as small a spike as possible relative to the requested voltage. With modern GPUs being notorious for power spikes, this is becoming more relevant in modern PSU design.
The specifications for ATX 3.0 were released in February 2022. It includes the new 16-Pin 12vHPWR connector that can deliver up to 600 W to graphics cards. These incorporate data lines for components to negotiate power capabilities with the PSU so they do not draw more power than the PSU is capable of delivering. The specification also has more strict requirements for handling spikes, two times the nominal output for 100 microseconds.
The transients are very clean, near-instant on the 3.3v and 5vsb, with a smooth ramp on the 12v with no over or undershoot.
OFFICIALLY LICENSED Built with matching firmware to seamlessly work with all models of PS5 and…
Pixart 3327 optical sensor with native DPI of up to 6, 200 Comfortable symmetric design…
✽[NOTES] An Aqara Zigbee 3.0 Hub is required and sold separately. The Aqara Cube T1…
Flight cloche with 4 firing triggers Dual speaker Riser included 17" monitor Light-up marquee Was…
14 games in 1 Wi-Fi Monitor 17” LCD Light Up Marquee 3D Coindoor Was £549.99…
Game in the Fast Lane: Play with hyper-fast, sub-1ms SLIPSTREAM CORSAIR WIRELESS TECHNOLOGY, or connect…