Featured

MSI MEG Z590 ACE Motherboard Review

MSI love to create some of the best motherboards out and they do a good job at offering users what they need. The MSI MEG Z590 ACE is an enthusiast-grade board that is going to be jam-packed with most of the bells and whistles that Intel’s 11th Gen CPU and Z590 chipset have to offer. The MEG ACE range of boards, as seen with the Z490 variant offers just enough to be an enthusiast board without crossing that line into professional overclocking.

MSI MEG Z590 ACE

As we have seen with all Z590 boards, when paired with an Intel 11th Gen CPU they have finally brought us PCIe 4.0 on an Intel setup. Alongside this, users will be able to take advantage of the MSI MEG Z590 ACE’s dual thunderbolt ports, quad M.2 slots, Wi-Fi 6E and 2.5G LAN among other features. In terms of design, the MEG Z590 ACE offers an 8-layer PCB, plenty of M.2 shielding, PCIe Steel Armour and 16x 90A Power Phases

Features

  • Backplate
  • 16+2+1 phases with 90A SPS
  • 8 Layer PCB
  • 128GB max memory
  • 4 M.2 Slots
    • Only 1 slot supports gen4 (with 11th gen cpu)
    • SATA2 unavailable when M.2_2 in use
    • SATA5+6 unavailable when M.2_3 in use
    • M2_2 & M2_3 support up to SATA 6Gb/s
    • M.2_4 slot supports PCIe only.
    • M.2_4 bandwidth reduces from x4 to x2 when PCIE_5 in use
  • 6x SATA
  • 3 PCIe X16 slots
    • x16/x0/x4, x8/x8/x4, x8/x4+x4/x4
    • Gen4 supported with 11th gen cpu
    • Gen3 supported with 10th gen cpu
    • 2 PCIe 3.0 x1 slots
    • 2 way SLI & 3 way Crossfire
  • Flash BIOS & Clear CMOS button
  • 2x Thunderbolt 40Gbps (Type C)
  • 2x Mini DP input
  • 2.5G LAN

For in-depth specifications, please visit the official Manufacturer Motherboard product page here.

Make sure to also check it out on:
AMAZON UK: https://amzn.to/3rsQs18
SCAN.co.uk: MSI MEG Z590 ACE

As this is an enthusiast-level board, it comes with loads of stuff in the box. We have stickers, manuals and even quick install guides to get us started.

For proper accessories we have, Wi-Fi antenna, USB drive, cleaning brush, screwdrivers, M.2 screw/standoff sets, DP to Mini DP cable, Thermistor cable, RGB splitter cable, Corsair RGV Cable extension, Rainbow RGB extension cable and 4x SATA 6.0GB/s cables. All in all, it should be enough for most and if not, it will definitely be enough for you to get the board up and running while you sort out what else you may need.

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13

Ben Enos

Disqus Comments Loading...

Recent Posts

Nvidia’s GeForce RTX 5090 Possible Price Revealed

According to a new report, the GeForce RTX 5090 GPU will be very expensive. It…

2 hours ago

AMD Krackan Processor with 6 Zen 5 and Zen 5c Cores for Budget AI Laptops Leaked

A new AMD processor in the form of an engineering model has been leaked in…

2 hours ago

SK Hynix Begins Production of First 321-Layer NAND Chips

SK Hynix has claimed to be the first company to mass-produce 321-layer NAND memory chips.…

3 hours ago

Trust Gaming GXT 609 Zoxa 2.0 PC Speakers

SOUNDS GREAT – Full stereo sound (12W peak power) gives your setup a booming audio…

7 hours ago

PowerA Wired Controller for Nintendo Switch

Special Edition Yoshi design Ergonomic controller shape with Nintendo Switch button layout Detachable 10ft (3m)…

7 hours ago

Logitech G Saitek PRO Flight Rudder Pedals

Fluid Motion: These flight rudder pedals are smooth and accurate that enable precise control over…

7 hours ago