Introduction
We’ve recently taken a look at how two OCZ Vector 180 960GB drives would perform in a RAID setup and to no one’s surprise, they were amazing. So how can we kick this up a notch? Easy, we take four of these amazing OCZ Vector 180 drives and try a RAID setup on them; now this is what I call fun and I love being able to test this setup.
Okay, I have to admit right away that this setup is halfway cheated, yet it shouldn’t have any performance impact. I only have two 480GB drives, but I also have two 960GB drives that use the exact same components. This means that I’ll just treat the 960GB drives as 480 ones and it won’t have any impact on our tests except that it will have a slightly different total space displayed. It’s really rare that I have four disks of the same brand for such a test, and I just didn’t want to let this chance slip away – and I’m sure more than a few of our readers will appreciate to find out how four of these drives will handle themselves in a RAID environment.
The new OCZ Vector 180 is the follow-up drive to the already successful Vector 150 series and on the base it’s still the same drive. It has however gotten a refresh in both parts, performance, and features, and it’s a drive well worth the attention that it’s getting here. With four drives at my disposal, I also got all the RAID modes available that the Intel RST has to offer: RAID 0, 1, 5, and 10, and I’ll be testing the drives in each available setup. The only place where I’ll only be using the two 480GB drives is the RAID 1 setup and this is a natural limitation based on the setup. Two disks are just max here.
The Vector 180 drive is based on the well-known, and in my opinion amazing, Indilinx Barefoot 3 M00 controller and it’s coupled with Toshiba’s A19nm NAND that we’ve seen perform great in any drive that it’s been used in. The drive is categorized as an enthusiast drive and that with good reason, the performance is great with a rated sequential speed of 550MB/s while reading and 510-530MB/s at writing. The random performance gets close to the 100K on 4K benchmarks, which isn’t bad either, not at all.
All the basic features like SMART, TRIM, and Garbage collection that is a must in every SSD these days are covered, but OCZ didn’t stop there. They also took something that’s usually reserved for enterprise-class drives and added it to their consumer drive and it’s called PFM+. PFM+ stands for Power Failure Management Plus and it helps to prevent data loss in the event of a sudden power loss. The drive has built-in capacitors that can provide enough power to flush the data from the cache to the NAND in the case that the power to the system should fail. Critical data can be saved with addition and it’s a great feature to have in any system.
OCZ’s Vector 180 comes with an official endurance rating of 50GB/day which is quite impressive for both desktop and server-grade disks. It also carries the amazing 5-year ShieldPlus warranty if the worst case situation should happen, where you can get around the hassle and troubles of normal RMAs and just get a new drive instead of the failed. I can not stress enough how amazing this is and you should give this warranty an extra look before you purchase your next SSD. It might be enough to change your mind on what to get, I know it did for me.
When it comes to what is bundled, then we find the usual great content inside the OCZ packaging. We get both a 3.5-inch adapter for those cases that aren’t suited for 2.5-inch drives natively as well as a key for the Acronis True Image disk cloning software so we easily can clone our old and slow drive onto our new and fast SSD. Other available capacities besides the 480GB are 120GB, 240GB, and 960GB.
