Featured

Raijintek Morpheus GPU Cooler Review

Introduction


Raijintek are still fairly new to the consumer market, but over the last couple of years they’ve come back again and again with products that offer award-winning performance at wallet friendly prices. Following the success of their CPU coolers, Raijintek are now moving into the world of graphics card cooling, starting with the Morpheus GPU cooler which we are reviewing today.

The new cooler is compatible with many of today’s latest cards ranging from the Nvidia GeForce GTX 650Ti right up to the Nvidia Geforce GTX 780Ti, not forgetting of course the AMD ranges where it’ll find a comfortable home with everything from the older 78xx range, the R9 270 range and the high-end R9 290 range. It’s those higher models such as the 780 Ti and the 290X that are of particular interest, as these are high performance cards with very demanding cooling requirements; that should be some indication of how capable the Morpheus should be.

Today I’ll be putting it through its paces on the Sapphire R9 270X Toxic, I’ve chosen this card due to it featuring one of the best coolers in its class and it represents the level of performance your average high-end consumer is likely to purchase.

As you can see from the features and specifications below, this block is capable of handling up to 360w TDP though its bank of 12 copper heat-pipes.

  • Cooling capacity up to 360 watts TDP
  • 12 pcs copper heat-pipes and 129 pcs fins for efficient heat dissipation
  • 24pcs heat-sink for RAM & 1 big heat-sink for VRM
  • High compatibility with modern & future VGA cards
  • Thermal adhesive to lower RAM and VRM temperature significantly and assure proper bond
  • Compatible with AMD Hawaii chip (R9 290/290x) and Curacao chip (HD 7850, 7870 xt; R9 270/270x)
  • Compatible with nVIDIA GTX Series Chip: 650, 650Ti, 660, 660Ti, 680, 760, 770, 780, 780Ti
  • Supports two 120mm fans (4 fan clips in the box)
  • Whole heat-sink nickel plated

The box is pretty straight forward, it has a run down of the specifications and GPU compatibility, although do keep in mind to check with your manufacturer as some GPUs feature custom PCBs and this could interfere with compatibility.

In the box you’ll find the cooler, four fan mounting clips, a set of universal mounting arms, four screws with plastic washers and springs, a plentiful supply of double-sided sticky pads (enough for multiple re-installations) and a nice assortment of VRM heat sinks.

Page: 1 2 3 4 5

Peter Donnell

As a child still in my 30's (but not for long), I spend my day combining my love of music and movies with a life-long passion for gaming, from arcade classics and retro consoles to the latest high-end PC and console games. So it's no wonder I write about tech and test the latest hardware while I enjoy my hobbies!

Disqus Comments Loading...

Recent Posts

Nvidia’s GeForce RTX 5090 Possible Price Revealed

According to a new report, the GeForce RTX 5090 GPU will be very expensive. It…

4 hours ago

AMD Krackan Processor with 6 Zen 5 and Zen 5c Cores for Budget AI Laptops Leaked

A new AMD processor in the form of an engineering model has been leaked in…

4 hours ago

SK Hynix Begins Production of First 321-Layer NAND Chips

SK Hynix has claimed to be the first company to mass-produce 321-layer NAND memory chips.…

5 hours ago

Trust Gaming GXT 609 Zoxa 2.0 PC Speakers

SOUNDS GREAT – Full stereo sound (12W peak power) gives your setup a booming audio…

9 hours ago

PowerA Wired Controller for Nintendo Switch

Special Edition Yoshi design Ergonomic controller shape with Nintendo Switch button layout Detachable 10ft (3m)…

9 hours ago

Logitech G Saitek PRO Flight Rudder Pedals

Fluid Motion: These flight rudder pedals are smooth and accurate that enable precise control over…

9 hours ago