Featured

Raijintek Orcus 240mm AIO Cooler Review

Test System and Methodology


Please note that our testing system was completely revised in September 2017. That means all previous results have been scrapped, and a new set of benchmarks introduced. For a look at our previous reviews, please consult our most recent review that used that system. Please note that we re-tested the Noctua NH-D15S as our base benchmark for cooling results.

Test system:

  • Gigabyte Aorus Gaming 9 Z270
  • Intel Core i7-7700K Delidded w/ NT-H1 under IHS
  • Gigabyte GTX 980 Ti
  • 32GB Crucial DDR4 2400 MHz
  • 512GB OCZ SSD
  • be quiet! Dark Power Pro 800W
  • Lian Li T80 Test Bench
  • All testing conducted using NT-H1 thermal paste

We’d like to say a big thank you to Gigabyte, Noctua, Crucial, Intel, OCZ, be quiet!, and Lian Li for providing us with the above testing equipment and their on-going support.

Testing Methodology

  • We always use Noctua Noctua NT-H1 thermal paste to make sure testing reveals the efficiency of the tested coolers not the efficiency of the bundled thermal paste
  • Prime 95 is run for 10 minutes to calculate “load” results
  • Unigine Superposition is run for 10 minutes to calculate “gaming” results
  • The average temperature across all cores is taken
  • Fans are left to operate at default PWM profile speeds unless otherwise stated
  • For water cooling tests, all pumps have been operated at 12 volts unless otherwise stated
  • Ambient temperatures should be between 21-23 degrees in all our tests unless otherwise stated
  • Acoustic measurements are taken 10cm horizontally and 10cm vertically away from the CPU cooler with the VGA fan disabled
  • Stock tests are performed using “out of the box” settings for the CPU
  • Overclocking tests are performed with the CPU set to 5 GHz and 1.345v
  • All coolers were tested under identical settings unless otherwise stated.
  • There is approximately a 1-degree Celsius margin of error in our temperature recording software CPUID HW Monitor
  • There is approximately a 1.5dBA margin of error with our Benetech GM1351 decibel meter
  • In all these graphs we may have a few “reference” results of particular products that do not fit within that category for comparative purposes.

Software Used

Page: 1 2 3 4 5

Peter Donnell

As a child in my 40's, I spend my day combining my love of music and movies with a life-long passion for gaming, from arcade classics and retro consoles to the latest high-end PC and console games. So it's no wonder I write about tech and test the latest hardware while I enjoy my hobbies!

Disqus Comments Loading...

Recent Posts

AMD Ryzen AI 7 350 from Upcoming Kraken Point Series Spotted on PassMark

Following the leak of AMD's flagship laptop CPU, another processor from the AMD Kraken Point…

3 days ago

DeepCool Launches ASSASSIN IV VC VISION CPU Cooler

DeepCool has just announced the ASSASSIN IV VC VISION CPU cooler, the latest in its…

4 days ago

Antec Performance 1 M Aluminium ITX Gaming Case Available Next Month!

Antec has just introduce the Antec Performance 1 M Aluminium ITX Gaming Case, which they…

4 days ago

Has Inno3D Leaked New NVIDIA RTX 5090 Features Before CES 2025?

INNO3D may have just given us a sneak peek at NVIDIA's next-generation graphics technology ahead…

4 days ago

PlayStation Exclusive Games Reportedly Heading to Xbox Next Year

Xbox continues to bring some of its "exclusive" titles to rival platforms, including Sony's PlayStation.…

4 days ago

Lords of the Fallen Sequel in Full Production with 200 Developers

Lords of the Fallen recently marked its first anniversary and is in far better shape…

4 days ago