Installation to our Z77 motherboard couldn’t be any easier with, it really is just a case of applying the thermal paste and putting the cooler on so that the 4 screws go through the holes in the motherboard
Then flipping the motherboard over and putting the 4 nuts that are supplied onto the protruding threads. They even give you a little spanner to tighten them up with.
That’s it, no other steps for installation, it really was one of the easiest coolers I have ever fitted. Once it is fitted there is plenty of room between the cooler and the RAM so you are not limited to low profile RAM, any ram will be compatible with this cooler. In the picture below, you can see there is around a 10mm gap.
OFFICIALLY LICENSED Built with matching firmware to seamlessly work with all models of PS5 and…
Pixart 3327 optical sensor with native DPI of up to 6, 200 Comfortable symmetric design…
✽[NOTES] An Aqara Zigbee 3.0 Hub is required and sold separately. The Aqara Cube T1…
Flight cloche with 4 firing triggers Dual speaker Riser included 17" monitor Light-up marquee Was…
14 games in 1 Wi-Fi Monitor 17” LCD Light Up Marquee 3D Coindoor Was £549.99…
Game in the Fast Lane: Play with hyper-fast, sub-1ms SLIPSTREAM CORSAIR WIRELESS TECHNOLOGY, or connect…