Cooling expert Scythe announces the official successor of Ninja 3 Rev. B CPU Cooler; the Ninja 4. It comes with some major technical innovations, mainly the increased cooling performance while incredibly shaving 180grams off the product weight.
“Ninja 4 stays true to the core concept of the Ninja series, by keeping focus on passive and semi-passive cooling capabilities of the tower-cooler. To further underline this core concept, a new fan with additional features has been introduced. The GlideStream 120 PWM fan has been equipped with a special fan controller, allowing users to switch between three different fan speed ranges. Low mode has been tuned for extremely silent operation, where PWM control range varies from 300 to 800 RPM at virtually inaudible noise levels from 4,0 to 12,5 dBA. Medium mode suits most user purposes, as it covers a wider range from 300 to 1,150 RPM and offers the best performance to silence ratio. The last mode has been implemented for users seeking more performance, since it offers the maximum fan speed range starting at 300 and ending at 1,500 RPM. Supplied GlideStream 120 PWM fan has great influence on the Ninja 4 design in addition, thanks to its grey fan blades and black fan-frame.
Scythe has made modifications to the structural design of the Ninja 4, where total of six 6-mm copper heatpipes are aligned in one layer inside the copper base-plate. Both the base-plate and heatpipes have been nickel-plated in addition. Thanks to this setup and further adjustments, total weight has successfully been reduced by 175 grams to 905 grams, while increasing the overall performance at the same time. Users seeking further improvement of performance or silence are able to mount another 120 mm case fan thanks to the second supplied set of fan clips.
Ninja 4 utilizes the back-plate based Hyper Precision Mounting System (H.P.M.S) for firm mounting and easy installation procedure. The socket compatibility list features AM2, AM2+, AM3, AM3+, FM1, FM2 and FM2+ from AMD™ as well as sockets LGA775, LGA1150, LGA1155, LGA1156, LGA1366, LGA2011 and 2011-v3 from Intel™. All mounting clips, one screwdriver, two sets of fan clips as well as thermal grease and a manual are supplied with the Ninja 4 CPU Cooler.”
The Scythe Ninja 4 is available as of today with a MSRP of 37.50€ ex. TAX.
According to a new report, the GeForce RTX 5090 GPU will be very expensive. It…
A new AMD processor in the form of an engineering model has been leaked in…
SK Hynix has claimed to be the first company to mass-produce 321-layer NAND memory chips.…
SOUNDS GREAT – Full stereo sound (12W peak power) gives your setup a booming audio…
Special Edition Yoshi design Ergonomic controller shape with Nintendo Switch button layout Detachable 10ft (3m)…
Fluid Motion: These flight rudder pedals are smooth and accurate that enable precise control over…