Today we’re taking a look at a DAS in one of its simplest forms: The SilverStone TS231U-C 2-bay RAID enclosure with 10Gbps USB-C connection. While it might be a simple DAS, it comes with the latest connection technologies.
SilverStone’s TS231U-C might be a simple DAS (Direct Attached Storage), but it still packs the features you want and a little bit more. But let us talk a bit about the general design first. The unit is quite compact and you’ll easily find a place to put it. That is good and not only because the included cable isn’t very long. The device itself is made from an SECC body with an aluminium finish. The aluminium doesn’t just look good, it also helps the unit with the cooling. But that isn’t enough to deliver a secure operation and that’s why it also has a 70mm low noise fan.
The installation is plug-and-play all the way through. The drive bays are built for tool-less and tray-less installation. While that is cool, it does bring along the limitation of only supporting one size of drives.
With the latest generation USB and the newest connector type, the TS231U-C is well equipped. The USB 3.1 Gen.2 standard allows for 10Gbps throughput while the reversible Type-C connector offers convenience. SilverStone added a Type-C to Type-A cable with this DAS which allows for maximum compatibility with previous USB standards.
UASP is supported too, that is if your operating system supports it. Windows 8 and newer versions do, and that should cover the majority of users. With UASP (USB Serial Attached Protocol), the system is able to talk more efficiently with the connected drives thanks to more command queues.
We’re past the time where drive capacity could be an issue. The TS231U-C supports all types of 3.5-inch hard disk drives, no matter their capacity. The unit also supports plug-and-play usage and hot-swapping of the drives.
With two drive bays available, we get RAID 0 and RAID 1 modes along with a JBOD span and a single drive mode. It is a little bit of a shame that the DAS doesn’t support 2.5-inch drives as it would be a perfect unit for an SSD RAID setup. With the 10Gbps performance of the USB 3.1 Gen.2 bus, there’s enough bandwidth available.
While it isn’t officially supported, I’ll naturally try to install SSDs in it anyway with the help of some adapters. Whether I’ll be successful or not is something you’ll see on the following pages.
SilverStone opted for an internal power supply in the TS231U-C and I love that. It makes the setup easier as well as cleaner. You don’t have an extra power brick or AC/DC adapter laying around or taking up huge spaces at your outlet.
The power supply delivers 12V and 4A which equals 48W. Plenty for two HDDs and the built-in system for the hardware RAID.
There are two main controllers inside the SilverStone TS231U-C that do most of the work. There is the ASM1352R which is ASMedia’s single chip solution to bridge USB 3.1 to a dual SATA interface. It also integrates ASMedia’s proprietary HydraTeK technology. With it, it supports RAID0 (Strip), RAID1 (Mirror), JBOD and Span (BIG) with low power consumption. And all while it keeps the resource usage free from the main CPU. The second controller is the ASM1542 which is a passive 10Gbps signal switch.
According to a new report, the GeForce RTX 5090 GPU will be very expensive. It…
A new AMD processor in the form of an engineering model has been leaked in…
SK Hynix has claimed to be the first company to mass-produce 321-layer NAND memory chips.…
SOUNDS GREAT – Full stereo sound (12W peak power) gives your setup a booming audio…
Special Edition Yoshi design Ergonomic controller shape with Nintendo Switch button layout Detachable 10ft (3m)…
Fluid Motion: These flight rudder pedals are smooth and accurate that enable precise control over…