The retention clips are easily attached to the back-plate, then it’s simply a case of pushing the four long screws through the back and attaching it to your motherboard, which should only take about 1-2 minutes in total.
Four plastic spacers are then slid over the screws and will hold the whole thing in place, ready for you to attach the coolers pump.
The pump fits easily over the four screws and you can attach the final four bolts with ease.
The fans are screws in place easy enough and you can easily mount the cooler to your chassis thanks to the easily positioned pipes. The only thing to keep in mind is the size, as with both fans in place it’s around 95mm deep.
OFFICIALLY LICENSED Built with matching firmware to seamlessly work with all models of PS5 and…
Pixart 3327 optical sensor with native DPI of up to 6, 200 Comfortable symmetric design…
✽[NOTES] An Aqara Zigbee 3.0 Hub is required and sold separately. The Aqara Cube T1…
Flight cloche with 4 firing triggers Dual speaker Riser included 17" monitor Light-up marquee Was…
14 games in 1 Wi-Fi Monitor 17” LCD Light Up Marquee 3D Coindoor Was £549.99…
Game in the Fast Lane: Play with hyper-fast, sub-1ms SLIPSTREAM CORSAIR WIRELESS TECHNOLOGY, or connect…