Here is the mounting hardware again just to give you a refresh. You have:
Installing the fans is pretty simple and you can choose to install them on either side of the radiator. There are 16 screws provided but only 8 support fans. The other 8 are for securing the radiator to the case.
The total thickness with fans added is 45mm (radiator) + 25mm (fans) = 70mm total. So you’re going to need a hefty amount of space at the top of your case. This certainly isn’t an option for everyone.
Installation is simple. You attach the backplate using the four screws and black spacers to secure.
The backplate has the appropriate holes for easy installation.
Then you use the spring screws to secure the pump unit. For Intel you can just use the pre-installed brackets for AMD you’ll need to swap them out for the provided AMD ones.
Baldur's Gate 3 is a success, and it seems redundant to say so, but what…
The Callisto Protocol on PS5 Pro reaches 8K at 30 fps with ray tracing enabled:…
Buying studios is a fairly common thing these days. However, in recent years, we've seen…
Standards / SpecificationsAdaptive Sync Technology (G-Sync / Freesync)AMD FreesyncStandard / specificationHDMI 2.0, DisplayPort 1.4, USB…
Pre-built ProjectD Tinker75 keyboard with official Fallout Nuka-Cola design TKL gaming keyboard with UK ISO…
SpeakersSpeakersYesSpeaker amount and power output2x 5 WattEfficiency ClassEU Energy Efficiency Class HDRGEU Energy Efficiency ClassGLightingLightingYesLighting…