Installation the fans was an easy task, simply use the eight included screws to fit them directly to the frame of the radiator. There are special short screws included for this job, as they’re very slim fans, but should you wish to use standard 120mm fans, you’ll also find a set of standard length screws to facilitate them.
The backplate is universal, so it works on all supported socket types. Simply pop the retention screws through the appropriate holes and you’re good to go.
Add the plastic spacers on the other side, then add your thermal paste.
Then simply attach the pump using the included thumb screws, although you can use a screwdriver if required. Overall, this is a quick and pain-free installation process.
OFFICIALLY LICENSED Built with matching firmware to seamlessly work with all models of PS5 and…
Pixart 3327 optical sensor with native DPI of up to 6, 200 Comfortable symmetric design…
✽[NOTES] An Aqara Zigbee 3.0 Hub is required and sold separately. The Aqara Cube T1…
Flight cloche with 4 firing triggers Dual speaker Riser included 17" monitor Light-up marquee Was…
14 games in 1 Wi-Fi Monitor 17” LCD Light Up Marquee 3D Coindoor Was £549.99…
Game in the Fast Lane: Play with hyper-fast, sub-1ms SLIPSTREAM CORSAIR WIRELESS TECHNOLOGY, or connect…