Fan Speed – Leadex Platinum 750W
When testing in a power supply laboratory it is difficult to take fan noise readings as the noise from the Sunmoon test equipment and air conditioning corrupts everything. The next best thing in our circumstances was reading off the fan speed with a tachometer to get an idea for the noise. The ambient temperature during testing held constant at 22 degrees, with 1 degree of variation. Each power supply had a consistent time period of 5 minutes to stabilise between each load scenario.
In my experience the following general relationships apply between noise levels and fan speeds, though it can vary greatly between the type of fan used.
- Below 800 RPM – Inaudible/Silent
- 800 to 1000 RPM – Barely audible
- 1000 – 1200 RPM – Audible but still quiet
- 1200 – 1400 RPM – Moderately noisy
- 1400 – 1800 RPM – Noisy
- 1800 RPM or higher – Intolerable
In stock mode, the PSU was very quiet up until it hit 80% load, something you’re not likely to do particular often, but even then it wasn’t unreasonably loud. With Eco mode enabled, the unit ran passive cooled all the way to 60% and was completely silent. Even at 80%+ load the PSU remained barely audible with Eco mode enabled, which is very impressive!
