Noise and Ripple can easily be measured by an oscilloscope. These show how much voltage fluctuation there is on a particular rail. We tested the rail stability of the 3.3 volt, 5 volt and 12 volt rails using an identical time and millivolt scale for all graphs.
The latest ATX 12 volt version 2.3 specifications state that ripple from peak to peak must be no higher than 50 millivolts for the 3.3 volt and 5 volt rails, while the 12 volt rail is allowed up to 120 millivolts peak to peak to stay within specifications.
| Load (%) | 3.3V Ripple | 5V Ripple | 12V Ripple |
| 20 | |||
| 40 | |||
| 60 | |||
| 80 | |||
| 100 |
As we can see the XFX Pro 750W Black Edition power supply had super tight regulation with very low noise and ripple across all rails. It was well within ATX specification and almost close to a total flat-line. In an ideal world there would be a totally flat-line with 0 millivolts of peak to peak ripple, the XFX unit wasn’t far off this.
Intel has just dropped a brand new update for its Arc GPU graphics drivers, but…
The latest keyboard from Epomaker is here, with the Galaxy 100, a $110 fully customisable…
Corsair has just announced the LX-R RGB Series, a new line of reverse-flow cooling fans…
NVIDIA has revealed the new games that support its latest graphics card technologies. We're talking…
The Apple M4 Max, the high-end option among the new Apple processors that launched in…
As Intel prepares to expand its Core Ultra 200 series of processors with “non-K” models,…
