Results (Load Temperature)
The same conditions are applied in our load tests with regards to the room temperature and equipment used throughout.
After we had concluded the idle test, we ran Prime 95 in a simple blend test to put 100% load across all cores and left for 15 minutes. Once 15 minutes had passed, we measured the temperature at 64 degrees which once again gave similar results of standings to the idle tests with a consistantly lower temperature compared to the Spire and Gelid Solutions coolers.
Once again, there was quite a large difference between the S963F and Hyper 212 Plus but we did expect this due to the bigger fan and more expensive product from CoolerMaster.
According to a new report, the GeForce RTX 5090 GPU will be very expensive. It…
A new AMD processor in the form of an engineering model has been leaked in…
SK Hynix has claimed to be the first company to mass-produce 321-layer NAND memory chips.…
SOUNDS GREAT – Full stereo sound (12W peak power) gives your setup a booming audio…
Special Edition Yoshi design Ergonomic controller shape with Nintendo Switch button layout Detachable 10ft (3m)…
Fluid Motion: These flight rudder pedals are smooth and accurate that enable precise control over…
